Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal pressu-
res.
Installation Instructions
The fitting must be installed, flushed and tested after
the valid norms!
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 - 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 80°C
Recommended hot water temp.:
65°C
Rate of flow by 0,3 MPa:
Handspray flow rate:
11 l/min
Aerator flow rate:
10 l/min
anti-pollution function
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
•
English
Cleaning
(see page 37)
If the waterflow drops, clean the filter
located between hose and handspray.
Operation
(see page 36)
Do not rotate the spout further than 360º or
damage to the hose will result.
Spare parts
(see page 37)
Dimensions
(see page 31)
Assembly see page 32
Do not use silicone containing acetic acid!
To adjust the hot water limiter on single lever
mixers, please see page 38. No adjustment
is necessary when using a continuous flow
water heater.
Maintenance
(see page 35)
The non return valves must be checked
regularly according to DIN EN 1717 in
accordance with national or regional
regulations (at least once a year).
Содержание Citterio
Страница 31: ...31 ...
Страница 32: ...32 1a 3 2 1b 4 5 CLICK SW 11 mm SW 19 mm ...
Страница 33: ...33 6 8 7 ...
Страница 38: ...38 2 1 3 4 5 6 7 60 C 10 C 0 3 MPa 0 3 МПа 0 3 ﻣﻴﺠﺎﺑﺴﻜﺎل ...
