Hans Grohe AXOR Starck Semi-Pro 10820000, Руководство по установке

Страница: 7 / 16

7
open close hot cold
English
Assembly
Important!
The fitting must be installed, flushed and
tested after the valid norms!
1. Flush through the supply pipes.
2. Place the mixer including the sealing washer in position
on the sink.
3. Slip the plastic washer, the slide washer, the metall
washer and collar over the hoses and threaded base
and tighten the collar nut by hand. If there is not enough
space, please use only the slide washer and the metal
washer without the plastic washer.
4. Tighten screws.
5. Connect the supply pipes to the isolation valves; cold
right - hot left.
The hot and cold supplies must be of equal pressures..
Operation
The handspray is activated by pressing the button. After
releasing the button, the mixer returns automatically to the
standard function.
If the waterflow drops, clean the filter located between
hose and handspray.
Technical Data
Operating pressure: max. 1 MPa
Recommended operating pressure: 0.1 - 0.5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bars = 147 PSI)
Hot water temperature: max. 80° C
Recommended hot water temp.: 65° C
Rate of flow: ca. 11 l/min 0.3 MPa
Test certificate: WRAS
Anti-pollution function
Hansgrohe single lever mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0.15 MPa.
Maintenance non return valve
The non return valves must be checked regularly according
to DIN EN 1717 in accordance with national or regional
regulations (at least once a year).
Spare parts (see page 3)
1 flange for handle 97466000
2 handle 10092000
3 nut 97157000
4 cartridge cpl. 96339000
5 aerator cpl. 13913000
6 fixing set 95049000
7 connection hose 900 mm 94082000
8 hose 720 mm 97475000
9 handspray 96920000
10 non return valve DW15 94074000
11 non return valve 95340000
Special accessories
12 extension base 97474000
(order as an extra)