Hans Grohe AXOR Citterio E 36143 9 Series, Инструкция по использованию/Инструкция по сборке, Страница: 2 / 12

0 2 EN
S A F E T Y N O T E S
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The hot and cold supplies must be of equal pressures.
I N S T A L L A T I O N I N S T R U C T I O N S
⁄ Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
⁄ The pipes and the fixture must be installed, flushed and
tested as per the applicable standards.
⁄ The plumbing codes applicable in the respective
countries must be observed.
⁄ The drain valve must only be used as intended. It is not
allowed to attach other objects to the drain valve, for
example a semi-pedestal.
T E C H N I C A L D A T A
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
Thermal disinfection: 70°C ⁄ 4 min
The product is exclusively designed for drinking water!
S Y M B O L D E S C R I P T I O N
Do not use silicone containing acetic acid!
D I M E N S I O N S (see page 10)
F L O W D I A G R A M (see page 10)
S P A R E P A R T S (see page 11)
XX = Colors
00 = Chrome Plated
14 = Brushed Bronze
30 = Polished Redgold
67 = Matt Black
S P E C I A L A C C E S S O R I E S
(order as an extra)
extension 25 mm #31971000 (see page 11)
C L E A N I N G (see page 09)
O P E R A T I O N (see page 09)
Hansgrohe recommends not to use as drinking
water the first half liter of water drawn in the
morning or after a prolonged period of non-use.
F A U L T C A U S E R E M E D Y
⁄ Insufficient water ⁄ Jet regulator or service unit
dirty⁄calcified
⁄ Clean⁄exchange jet regulator or service
unit
⁄ Instantaneous heater didn’t work ⁄ Flow too low ⁄ Clean⁄exchange jet regulator or service
unit
A S S E M B L Y (see page 04)