Hans Grohe AXOR 250/580 3jet 35283000, Инструкция по использованию/Инструкция по сборке

Страница: 4 / 40

Fault Cause Remedy
Head shower extremely leaky - Head shower soiled / scaled - Clean / descale head shower
see page 41
Assembly see page 34
Cleaning (see page 35) and enclosed brochure
Waste
The waste drain performance must be more than 50 l/min.
The wall must be reinforced in this area.
Cold water
Warm water
Installation example (see page 32)
Flow diagram
(see page 32)
Dimensions (see page 31)
Do not use silicone containing acetic acid!
Symbol description Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries.
The arm of the shower head is intended only to hold the shower head. Do not
load it down with other objects!
Children as well as adults with physical, mental and/or sensoric impairments
must not use this product without proper supervision. Persons under the influ-
ence of alcohol or drugs are prohibited from using this product.
Do not allow the streams of the shower touch sensitive body parts (such as your
eyes). An adequate distance must be kept between the shower and you.
The product may only be used for bathing, hygienic and body cleaning pur-
poses.
Installation Instructions
• Prior to installation, inspect the product for transport damages. After it has been
installed, no transport or surface damage will be honoured.
• The pipes and the fixture must be installed, flushed and tested as per the applica-
ble standards.
• The plumbing codes applicable in the respective countries must be observed.
• Where the contractor mounts the product, he should ensure that the entire area of
the wall to which the mounting plate is to be fitted, is flat (no projecting joints or
tiles sticking out), that the structure of the wall is suitable for the installation of the
product and has no weak points. The enclosed screws and dowels are only suit-
able for concrete. For another wall constructions the manufacturer's indications of
the dowel manufacturer have to be taken into account.
• The mesh washers must be installed to protect against incoming dirt by pipework.
Incoming dirt can impair the function and/or lead to damages on functional
parts of the fixture; Hansgrohe will not be held liable for resulting damages.
• The product is not designed to be used with steam baths!
Technical Data
Operating pressure: max. 0,6 MPa
Recommended operating pressure: 0,17 - 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 60°C
Recommended hot water temp.: 42°C
Thermal disinfection max. 70°C / 4 min
This mixer cannot be used in conjunction with hydraulically, electronically or ther-
mally controlled instantaneous heaters.
The product is exclusively designed for drinking water!
English
Safety gloves must be worn
Eye protection must be worn
Decalcifier
(Citric acid base)
Avoid contact with eyes and skin. If this product contacts
your eyes, rinse thorougly with water.
natural sponge
Spare parts
(see page 38)
4
> 50 l/min
Raindrain