©MEMO:FOR present store stations and present recall function
Preset store operation instruction:
Press
® / (0)
TUN+/- button adjust target frequency,long press ©
button,appear
"CH01-CH50*
on
the
LCD,and
the
stored
number
address"CH01-CH50" is flashing,press the ®/®VOL+/- buttons search for the
target stored number address.press © button again.LCD display*MEMO",after
1 second, had finish the preset store operation.
©MODE: (Mode conversion of each band)
FM state:pu t the 3.5mm earplug into the radio,short press the ©button,LCD
appear "MONO* OR 'S T 'e a c h time press ® button,two model will
exchange.("ST* is short for "STEREO")
AM sta te :sh o rt press © button,the LCD will display 520KHZ or 522KHZ
exchange.520KHZ it is mean the radio step value is 10K,press the ©
button,the LCD will display 522KHZ,now it is mean the radio step value is 9K.
When the AM step value is 9k,the frequency range is:522-1710KHZ
When the AM step value is 10K,the frequency range is :520-1720KHZ
Note:in the United states,Canada,Mexico,Australia and other North American
and South American countries must set to 10KHZ,other countries must set to
9KHZ.
SW s ta te :S W step value is 0.005MHZ. on the SW state , short press © button
it is METE cyd e switching,it is convenient for search for target station:
2.300/3.200/3.900/5.000/6.030/7.150/10.000/11.479/13.600/15.000/17.65
0/19.00/26.000
A IR s t a te :it is step value 5KHZ/25KHZ exchange.short press ©button,LCD
display 05k or 25K.it is convenient.
VHF state:N arro w band FM-N and broadband FM-W exchanged.short press ®
button and the LCD display the words FM-N or FM-W.
(flSET:FO R setting time/setting SQ function:
Settin g tim e operation in stru ctio n :
Put the batteries into the radio or connect external DC5v power.the radio on
clock state,long press © button, hour digital flashing,press ®TUN+/®TUN- for
adjusting the correct hours. After adjusted the correct hour,press the © button
again,the minute digital flashing,it is the same with adjust hour method,press
®TUN+/©TUN- for adjust correct minutes.
Finished the correct time.short press the © button again.or wait about two
second.the radio will default the adjusted time (setting time is in the case of
backlight in the LCD.)
