Hanover X35WMEF1BLK, Инструкция по установке и эксплуатации

Страница: 10 / 16

9
Carefully remove the unit from the box. Prior to installing
the unit, test to make sure the unit operates properly. To do
this, plug the unit's power supply cord into a conveniently
located 120-Volt grounded outlet.
This insert is for use with 120 Volts. The cord has a plug as
shown in (A) of Figure 2 given below. An adapter as shown
in (C) is available for connecting three-blade grounding-
type plugs to two-slot receptacles. The green grounding
plug extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet
box. The adapter should not be used if a three-slot
grounded receptacle is available.
To disconnect heater, turn controls to off, then remove
plug from outlet.