8
4.With the help of another person, carefully place the table rim onto the firepit base.
After making any necessary adjustments to the alignment of the table rim and the
assembled base, use four
1/4"x15 mm bolts and Ø18xØ6.5x1.5 mm washers as shown
in Figure 6. Guide the bolts through the holes in the side panel brackets, into the
predrilled holes in the table rim.
Hand tighten only.
Figure 4
5.Secure the regulator hose to the middle support by using two
1/4"x15 mm bolts and
Ø6.5X1.0 mm washers as shown in Figure 5. Guide the bolts through the holes in the
metal plate, into the pre-drilled holes in the middle support.
Hand tighten only.
Figure 5