9
NOTE:
You must reset the desk prior to use.
Reset Procedure: Press and hold the DOWN button on the Switch (P7) until the desk reaches the lowest
position. Release the DOWN button. Press and hold the DOWN button again until the LED display reads
“RST”. Release the DOWN button. Press and hold the DOWN button again until the desk again lowers then
slightly rises and stops. Release the DOWN button. Your desk is now ready to use.
Programming Presets: Use the up/down buttons to find a desired height, then press “M” followed by a
number 1-4.
CAUTION:
Once a preset button is pushed, the desk will immediately begin moving to the programmed height
(see warnings above).
Troubleshooting
If your desk is not functioning properly it may need to be reset. Unplug the power cord for 20 seconds.
Plug the power cord back in and follow the Reset Procedure outlined above.
If your desk display reads “RST” (reset), perform the Reset Procedure outlined above.
If your desk displays an error message confirm that all wired connections are secure (legs to cables,
cables to control box). Then perform the reset procedure outlined above.
If your desk displays “HOT”, let the base cool down for 20 minutes.
