Assembly Instruction
Item No: HNEVEGLD-8FLR
1. Carefully unpack and take out the parts as in drawing below.
2. Insert column (H),(I),(J) vertical into the base (A) tightly. Then insert arm assembly (A) into column (H) tightly.
3. Loosen the nut (B) from the socket bracket (D).
4. Install the bulb (F) into the socket (E). BULB(S) NOT INCLUDED
5. Have the opening of glass shade (G) go over the socket (E), insert one side of glass shade (G) opening
over the socket bracket (D), then adjust the glass shade position and put the other side of the glass shade (G)
over the other side of the socket bracket (D), then position against the cap (C).
6.
Carefully adjust the glass shade (G) placement and have it sit centered on top of the cap (C). Then thread
down the nut (B) and tighten together both socket bracket (D) and glass shade (G).
Note: 120V/60W
