FSS60471AST
8
Table Assembly
Step 1:
•
Place the table rim (I) on a soft surface.
Line up the holes on the table legs (L) and
table rim (I). Insert M6x20 combination bolt
& washer (BB), loosely tighten using Allen
wrench (DD).
Step 2:
•
Place the connector bracket (K) between
the four table legs (L).
•
Attach the connector bracket (K) to the
table leg (L) by lining up the bolt holes on
the connector bracket (K) with the
corresponding bolt holes on the table leg
(L).
•
Insert M6x30 combination bolt & washer
(CC) ,tighten using the Allen wrench (DD).
•
Do not completely tighten bolts until all
parts are fully assembled.
•
Repeat the same steps to secure all four
table legs (L) to the connector bracket (K).
Step 3:
•
Tighten all the screws.
•
Turn the table right side up. Place glass (J)
onto the table rim (I).
