Page 4
ASSEMBLY INSTRUCTIONS
1
Attach the leg support bar to the chair frame by using four bolts and washers as shown in the diagram.
Guide the bolts through the holes in the leg support bar, into the pre-drilled holes in the chair frame.
Hand tighten only 2-3 turns.
After making any necessary adjustments to the alignment of the parts, use the hex bolt driver to tighten
all bolts. Repeat until all bolts are tight.
Over tightening may strip bolts. With the
help of another person, turn the chair in the upright position. Cover all bolts with the bolt covers.
Do not over tighten.
2
C
D
E
B
A
FOOT CAP-2
FOOT CAP-1
