H a n n S t a r D i s p l a y C o r p .
Document Title
HW191A _XY _HSM
Page No.
52
52 /
72
Document No.
Revision
07/08/03
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed,distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Click
to complete the installation.
3. Connect the DDC board as follow:
(Take philips 190B8 for example)
Note: Pin5 of the VGA cable which connects to the monitor should be cut off.
Connect to the
PC LPT
When you write analog
EDID, Connect this port
to the Philips 190B8’s
VGA port
12V Input
When you write digital
EDID, Connect this port
to the Philips 190B8’s DVI
port
022-83718162
www.chinadse.org
022-83715667