22
Engl
ish
2.3 Using the TV
2.3.1
Turning the TV On and Off
1
Press
on the control panel or remote control. The power LED turns white
when the device is turned on.
2
Press
again.
The power LED turns off when the device is turned off.
2.3.2
Switching Source Signals
Press
INPUT
on the control panel or remote control to select the incoming source
signal.
2.3.3
Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1
Press
MENU
on the control panel or remote control, then select to enter the
TV
menu.
2
Select
Channels
>
Channel Scan
>
ATV only
or
ATV and DTV
.
3
Press on the remote control to run the channel search.
2.3.4
Selecting Channels
•
Press
P
S
on the remote control (or
P
on the control panel) to increase
the channel number.
•
Press
P
T
on the remote control (or
P
on the control panel) to decrease
the channel number.
•
Enter the specific channel number by pressing the number buttons on the
remote control.
2.3.5
Adjusting the Volume
1
Press
VOL+
on the control panel or remote control to increase the volume.
2
Press
VOL-
on the control panel or remote control to decrease the volume.
3
Press
MUTE
to eliminate sounds, and press
MUTE
again or press the
volume buttons to restore the original volume.
