User’s Manual
8
INSTALLATION INSTRUCTIONS
INSTALL
REMOVE
Figure.1. Installing and Removing the Base
INSTALLATION:
1. Install the Arm on Monitor with 3 screws.
2. Align the monitor with the opening in the base.
3. Rotate the stand base 25
°
clockwise, A clear click sound will affirm that the base is connected
correctly.
REMOVAL:
1. Gently pull up base card buckle, Rotate the stand base 25
°
counterclockwise.
2. Gently pull the base from the monitor until they are unattached.
3. Remove the screws so that the stand base can be removed, then gently remove the stand base.
Warm prompt:
Place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to
Monitor while install and remove.
POWER
POWER SOURCE:
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an Internal universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3. Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other end to
wall-outlet.
