HANNspree HANNSpad SN14T72, Руководство пользователя

Страница: 12 / 17

11
Engl
ish
2.3 Connecting PC and Data Transmission
Use the supplied USB cable, connect the device to the PC to transfer data or power up the device.
To enter the USB disk mode to copy and delete files to and from the PC, do the following:
1. When the operation menu appears, tap “USB connected”: Tap “Turn on USB storage” on the
prompting window, then enter the data transmission state.
2. Locate the tablet storage card and SD card (if the card has been plugged in) in My
Computer list.
3. After data transmission, tap “Turn off USB storage”, and then it will quit the data
transmission state.
2.4 Use TF Card
After connecting the device to a PC, you will find two removable disks, the front one is the
built-in-memory disk, the other one is the TF card disk. If there is no card plugged in, the second
disk cannot be opened. The device supports up to 32GB TF card expansion.
Plug-in : insert the memory card with the side with prints facing to the front of the device. Push the
memory card into the card slot until it is firmly seated. Now the device can access the data and play
the files stored on the card.
Plug-out : push TF card slightly inward to release it from the slot. Then gently pull it out of the card
slot.
NOTE: USB charging only supports 500mA. If the battery power is lower than 4%, the device cannot be turned
on.
NOTE: Before quitting the state of data transmission, please safety remove them from the PC, otherwise the
file may be missing.