RADIO OPERATION
1.
Set the FUNCTION Selector to the
RADIO
position.
2.
Slide the BAND Selector to the
AM
or
FM
position.
3.
Turn the TUNING Control to your desired radio station.
4.
Adjust the sound level by rotating the VOLUME Control.
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM reception, the unit has a
built-in antenna, turn the whole unit for the best reception.
CD FUNCTION
To play a CD, please follow these steps.
1.
Set the FUNCTION Selector to the CD position.
2.
Insert the CD disc in the CD compartment and close the CD door, the unit will start reading the disc,
the LED display will show the total number of tracks of the entire disc after reading.
3.
Press the CD PLAY/PAUSE button to start playing the CD.
4.
Adjust the VOLUME Control to the desired volume level.
5.
Press the CD STOP button, to stop playing the CD.
Skip Mode
1.
During play or pause mode, if the CD SKIP/SEARCH FORWARD button is pressed, it will go to the
next track and display the track number on the LED Display. If in play mode, the next track will begin to
play. If in pause mode, it will remain paused.
2.
During play or pause mode, if the CD SKIP/SEARCH BACKWARD button is pressed once, it will go
back to the beginning of the track and display the number on the LED Display. If in play mode, the next
track will begin to play. If in pause mode, it will remain paused.
3.
During play or pause mode, if the CD SKIP/SEARCH BACKWARD button is pressed twice, it will go to
the previous track.
Programming the CD Player
To program the CD Player, please ensure the CD is in
STOP
mode.
1.
Press the CD PROGRAM button to begin programming the CD player.
2.
Press the CD SKIP/SEARCH FORWARD or CD SKIP/SEARCH BACKWARD buttons, to select your
desired track.
3.
Once the number of the desired track appears on the display, press the PROGRAM button again to
store the track in the memory.
4.
Repeat steps 2 to 3 to store more tracks in the memory. You can store a maximum of 20 tracks.
5.
Press the CD PLAY/PAUSE button to play the disc in the programmed order.
6.
To stop playing, press the CD STOP button.
7.
To cancel the programmed tracks, press the CD STOP button or select a different function mode (AUX,
TAPE or RADIO).
Repeat Mode
Repeat 1:
When the CD REPEAT button is pressed once, the REPEAT LED Indicator will light and flash
continuously. This single track will be repeated.
Repeat All:
When the CD REPEAT button is pressed twice, the REPEAT LED Indicator will stay lighted.
The whole disc will be played repeatedly.
To Cancel Repeat Function:
Press the CD REPEAT button until the lighted REPEAT LED Indicator turns
off.
-3-
CASSETTE OPERATION
INSERTION AND REMOVAL OF CASSETTES
1.
Press the Cassette EJECT button to open the Cassette Door.
2.
Slip your cassette tape into the holder with the exposed side facing up (the side for playing faces you).
3.
Close the Cassette Doors securely before starting.
4.
When finished playback, press the Cassette STOP button, then the Cassette EJECT button to open
the Cassette Door, and retrieve your cassette tape.
PLAYBACK
1.
Set the FUNCTION Selector to the TAPE position.
2.
Insert your cassette tape with the exposed side facing up.
3.
Press the Cassette PLAY button to activate playback.
4.
Set the Volume to the desired level.
5.
Press the Cassette STOP button when finished.
RECORDING
RECORDING FROM THE RADIO
1.
Set the FUNCTION Selector to the RADIO position.
2.
Tune in your station and put in your cassette tape with the exposed side facing up.
3.
Press the Cassette RECORD button and the Cassette PLAY button at the same time to start
recording.
4.
Press the Cassette STOP button when finished.
RECORDING FROM CD
1.
Set the FUNCTION Selector to the CD position.
2.
Insert a blank cassette into the deck with the exposed side pointing up (the side for recording faces
you).
3.
Press the Cassette RECORD button and the Cassette PLAY button at the same time, the unit will then
go into recording mode.
4.
Activate the CD player.
5.
To stop recording, press the CD STOP button, then press the Cassette STOP button.
AUX-IN CONNECTION
1.
Insert the audio cable (requires 3.5mm stereo plug, not supplied) into the Line Out Jack or Phones
Jack on your MP3 Player into the corresponding AUX Input Jack on your main unit;
2.
Turn on your main unit and slide the FUNCTION Selector to
AUX
position;
3.
Make sure your MP3 Player is turned on, and follow your MP3 Player’s instruction;
4.
To stop this function, simply slide the FUNCTION Selector to
TAPE
position.
HEADPHONES
Headphones should have a 3.5mm diameter stereo plug and an impedance of 8-32 ohms.
When headphones are connected, the speakers are automatically disconnected.
SPECIFICATIONS
Frequency Range: AM 530 - 1710 KHz
FM 88 - 108 MHz
Power Supply:
AC 120V ~ 60Hz
DC 9V
(6 “C” size batteries, not included)
-4-
