1.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
2.
Do not use this apparatus near water.
3.
Clean only with dry cloth.
4.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
6.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
7.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
8.
Only use attachments/accessories specified by the manufacturer.
9.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
10.
Unplug this apparatus during lightning storms or when unused for long periods of time.
11.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
12.
Grounding or Polarization – This product may be equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This
is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
13.
Alternate Warnings – This product is equipped with a three-wire ground-type plug, a plug having a third
(grounding) pin. This plug will only into a grounding-type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the grounding-type plug.
14.
Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked or
covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
15.
The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
16.
回
: CLASS II apparatus with double insulation, and no protective earth provided.
17.
Caution Marking and rating plate was located at bottom enclosure of the apparatus.
18.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
19.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, shall be placed on apparatus.
20.
The mains plug is used as disconnect device. The mains plug of apparatus should not be obstructed
OR should be easily accessed during intended use. To be completely disconnect the power input, the
mains plug or apparatus shall be disconnected from the mains.
21.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
22.
Excessive sound pressure from earphones and headphone can cause hearing loss.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
–
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
-EN 2-
LOCATION OF CONTROLS
1
Speakers
13
BAND Switch
2
FM Antenna
14
BASS Button
3
FLODER DN Button
15
CD Compartment
4
FOLDER UP Button
16
LCD Button
5
MODE Button
17
CD Door Open Button
6
SKIP DOWN Button
18
AUX-IN Jack
7
SKIP UP Button
19
Battery Compartment
8
STOP/USB Button
20
AC Socket
9
PLAY/PAUSE Button
21
Handle
10
VOLUME Control
22
USB Slot (1A Charging)
11
TUNING Control
23
USB Slot (Decoding)
12
FUNCTION Switch
24
NFC Sensor
AC OPERATION
Before operation, please make sure that the VOLTAGE mentioned on the unit is same as
the voltage of your local area. Unravel the AC power cord, insert one end into the AC
socket on the set, and the other end into a standard AC outlet.
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands.
2. When planning not to use this unit for a long time, disconnect the power cable from
the wall outlet.
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in
order to avoid shock risks caused by damaged cable.
BATTERY OPERATION
Disconnect the AC cord set completely. Open the battery compartment door and insert 8
pieces UM-2 "C" size batteries into the battery compartment with battery polarity as
shown inside the battery compartment.
–EN 3 –
