ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations.
MEMORIZE RADIO STATIONS
1.
Tune to the desired FM station.
2.
Press
PROG/MEM.
Button, LCD display will show ‘PXX ‘(XX indicates the preset memory).
3.
Use
SKIP+/TUN+
or
SKIP−/TUN-
button to cycle through the preset stations 1-10
4.
Press
PROGRAM/MEM.
Button to store the radio station in the memory.
5.
Repeat steps from 2 to 3 to store more tracks in memory. You can store up to 10 radio stations in the
memory.
TO SELECT THE RADIO STATION IN THE MEMORY
Press
STOP/M+
button for the radio station memory and press the
STOP/M+
button skip up to the next
memory station.
CD OPERATION
1.
Press
POWER/ OFF/ FUNCTION
button to turn on the unit.
2.
Press
POWER/ OFF/ FUNCTION
button to turn to select CD mode.
3.
Insert the CD disc in the CD compartment and close the CD door, the unit will start reading the disc.
4.
LCD display will show the track played time.
5.
Use the
VOL+
or
VOL−
button to adjust the volume to the desired listening level.
6.
To stop playing the CD, press the
STOP/M+
button or simply hold
POWER/ OFF/ FUNCTION
button
to turn off the unit
Skip Mode
1.
During play or pause mode, press the
SKIP+/TUN+
button to go to the next track.
2.
During play or pause mode, press the
SKIP−/TUN-
button to go back to the beginning of the track.
3.
During play mode, press the
SKIP−/TUN-
button twice will go back to the previous track.
Programming the CD Player
The programming of the CD player should be done during
STOP
mode.
1.
Press the
PROG/MEM
button, the LCD display will show ‘ P01 ‘ and flash continuously.
2.
Press the
SKIP+/TUN+
or
SKIP−/TUN-
buttons to select the desired track.
3.
Press the
PROG/MEM.
button again to store this track in memory, the LCD will show ‘ P02 ‘ and flash
continuously.
4.
Repeat steps from 2 to 3 to store more tracks in memory. You can store up to 20 tracks in the memory.
LCD will show “
FULL
” if the memory is full.
5.
Press the
PLAY/PAUSE
button to play the disc in the programmed order.
6.
To stop playing, press the
STOP
button.
7.
To cancel the programming list, press the
STOP
button and open the CD door or simply hold
POWER/
OFF/ FUNCTION
button to turn off the unit
Repeat Mode
Repeat 1: Press the
REPAT
button once. LCD will show “
rEP.1
”. This single track is repeated.
Repeat All :Press the
REPEAT
button twice, LCD will show “
rEP.A
”. The whole disc is played continuously.
To Cancel Repeat Function: Press the
REPEAT
button until the LCD shows the tract playback time. .
MP3/AUX IN Connection
1.
Press
POWER/ OFF/ FUNCTION
button to turn on the unit.
2.
Press
POWER/ OFF/ FUNCTION
button to turn to select AUX mode.
3.
Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out jack or
phones jack on your MP3 player and the other side to the aux-in jack on the unit.
4.
Turn on your MP3 player and follow the playback instruction.
5.
To stop this function, simply turned off your MP3 player.
-3-
BLUETOOTH STREAMING
1.
Press
POWER/ OFF/ FUNCTION
button to turn on the unit.
2.
Press
POWER/ OFF/ FUNCTION
button to select the Bluetooth mode. The LCD display will show “
bt
”
and flash.
3.
Turn on your Bluetooth of your Bluetooth device and search the boombox for connection. Your
Bluetooth device should find
“HX-305CD HANNLOMAX”.
4.
If the connection is successful, ‘
bt
’ will stop flashing and remains on.
5.
Select and play the audio files though your Bluetooth device.
6.
You can use the
TUN+/SKIP+
button to go to the next track or press the
TUN-/SKIP−
button to go
back to the previous track.
7.
Press the
PLAY/PAUSE
button to temporarily pause playing. To resume, press the
PLAY/PAUSE
8.
To stop this function, switch to other mode or shut down your Bluetooth of your Bluetooth device
AUTO PAIRING
Once the unit paired with the Bluetooth device, it will automatically pair with that device next time when you
turn on the unit and that Bluetooth device.
Care and Maintenance
Always turn off the unit after use.
Keep the unit away from magnetic objects, water or heat sources.
Use a clean soft cloth moistened with lukewarm water to clean the cabinet. Never use chemical
cleaners that could damage the finish of the unit.
Never touch the CD pickup and lens. If fingerprints get on the pickup lens, clean it gently with a
commercial lens cleaner.
Disconnect the unit from any power sources before cleaning.
To remove a disc from its storage case, press down on the centre of the case and lift the disc out,
holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth. Unlike
conventional records, compact discs have no grooves to collect dust and microscopic debris so gently
wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the
outside of the disc. Small dust particles and light stains will have absolutely no effect on reproduction
quality.
Never use chemicals such as record sprays, anti-static sprays, benzene or thinners to clean compact
discs. These chemicals can irreparably damage the disc’s surface.
Discs should be returned to their cases after use. This avoids serious scratches that could cause the
Laser pickup to skip.
Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. Long
exposure to high temperatures can warp the disc.
Do not stick paper or write anything with a ballpoint pen on the label side of the disc.
Specifications
Frequency Range:
FM 87.5 – 108 MHz
Power Supply:
AC 100V-240V ~ 60/50 Hz
Rated Output
DC 5V 1.5A
Battery:
DC 6V
(UM-2 x 4)
Specifications are subject to change without prior notice.
-4-
