LOCATION OF CONTROLS
1
CD Compartment
16
FM Wire Antenna
2
TIME Button
17
AUX-IN Jack
3
REPEAT Button
18
Back-up Battery Compartment
4
AL1 Button (ALARM 1)
19
LED Display
5
AL2 Button (ALARM 2)
20
PM Indicator
6
/M
+
Button
21 AL1-Buzz
Indicator
7
/ TIME ZONE Button
22
AL1-Music Indicator
8
VOL
+
Button
23 REP
Indicator
9
VOL
−
Button
24 AL2-Buzz
Indicator
10
TUNE/SKIP
+
Button
25 AL2-Music
Indicator
11
TUNE/SKIP
−
Button
26
USB charging port (1A)
12
SOURCE/AL OFF Button
27
USB charging port (2.1A)
13 SNOOZE/SLEEP/DIMMER
Button
14 PROG/MEM
Button
15 DC
Jack
- 4 -
CONNECTING THE UNIT TO POWER
AC OPERATION
Plug one end of the AC adaptor into the DC power Input, and then plug the other end
into AC wall outlet. Before switching on the unit, make sure that the voltage of your
electricity supply is the same as that indicated on the rating plate.
BACK-UP BATTERY
The unit has pre-installed a CR-2032 lithium battery inside the back-up battery
compartment. In case of power failure or interrupted AC power, the current time, alarm
time and the stored radio stations are preserved in the memory of the unit by means of
battery back-up function.
OPERATE THE CLOCK
When the clock is plugged in, the correct time will be displayed after a few seconds.
(Note : The default Time Zone is set on Zone 2 - Eastern Time).
The clock will
automatically indicate the AM or PM time. When the PM indicator is on, the time display
is PM.
SELECT THE TIME ZONE
There are 7 time zones programmed as follows:
ZONE 1 – Atlantic Time
ZONE 2 – Eastern Time (Default Setting)
ZONE 3 – Central Time
ZONE 4 – Mountain Time
ZONE 5 – Pacific Time
ZONE 6 – Yukon Time
ZONE 7 – Hawaiian Time
CHANGE THE TIME ZONE
Make sure that the unit is in CLOCK mode. To confirm, Press and hold the SOURCE/AL
OFF button for one second until “
OFF”
appears on the display.
While the unit is in CLOCK mode, press the
TIME ZONE
button, the display will show the
current time zone number.
Press the
TIME ZONE
button repeatedly to select your time zone. When the desire time
zone is selected, release the button, the time zone will store in the memory after 1-2
seconds.
When you moved to a different time zone, simply change the time zone to the new time
zone, the unit will store the new time zone in the memory.
- 5 -
