16
FM Wire Antenna (
Extent this wire antenna to obtain better FM broadcasting.)
17
AUX-IN Jack (
Connect the unit to the external audio device.)
18
PM Indicator (
This indicator shows that the time display is PM)
19
SPEAKER
20
ALARM 2 NATURE SOUND Indicator
This indicator shows that the unit is set in ALARM2 Nature Sound mode.
21
ALARM 1 NATURE SOUND Indicator
This indicator shows that the unit is set in ALARM1 Nature Sound mode.
CONNECTING THE UNIT TO POWER
Plug AC power cord to the AC wall outlet. Before switching on the unit, make sure that the voltage of your
electricity supply is the same as that indicated on the rating plate.
BATTERY BACKUP
Insert two pieces UM-4 (“AAA”) batteries into the battery compartment. Be sure to observe the proper
polarity (the "+" and "-" signs) as indicated inside the battery compartment.
In case of power failure or interrupted AC power, the current time and alarm time settings, the stored radio
stations are preserved in the memory of the unit by means of battery back-up function.
SETTING THE CLOCK
1.
Ensure the unit in
CLOCK
mode. Press and hold the
CLK/MEM
button for about 1 second, the time
will flash on the LED display.
2.
Press the
/MIN
button to adjust the minute.
3.
Press the
/HR
button to adjust the hour.
4.
When the correct time is selected, press the
CLK/MEM
button again to confirm.
SETTING THE ALARMS
1.
With the unit in
CLOCK
mode, press the
ALM1/VOL+
or
ALM2/VOL−
button. The ALARM time will
begin to flash on the LED display.
2.
Press the
/HR
button to adjust the alarm hour.
3.
Press the
/MIN
button to adjust the alarm minute.
4.
When the correct time is selected, press the
ALM1/VOL+
or
ALM2/VOL−
button to confirm.
5.
Press the
ALM1/VOL+
or
ALM2/VOL−
button to select the ALARM sound mode -
Buzzer
Mode,
currently set
Radio
station or
Nature Sound
Mode. The alarm
Buzzer
or
Radio
or
Nature Sound
indicator will light up accordingly.
Note:
You can select the desired Nature Sound for the alarm sound.
1. Press and hold
NATURE SOUND SELECT
Button until the display shows “
n s
”.
2. Press the button repeatedly to select 20 different Nature Sounds. For example, “
n01
” means the first
Nature Sound, “
n20
” means the twentieth Sound and “
n a
” means all the nature sound.
1.Heartbeat
2. Foghorns
3.Wind chimes
4. Aviary
5. Brook
6. City
7. Oceanside
8. Fireside
9. Dockside
10. Rain
11. Rainforest
12. Roadside
13.Steam Train
14. Surf
15.Thunderstorm
16. Tide
17. White Noise
18. Summer Night
19. Northwoods
20. Everglades
SNOOZE FUNCTION
1. Whenever the alarm (buzzer or radio or nature sound) activates, it can be temporarily suspended for a
short period of 9 minutes by pressing the
SNOOZE/SLEEP
button once.
2. The alarm will then automatically activate again after the 9 minutes SNOOZE period has ended.
3. This procedure can be repeated for up to approximately one hour.
-3-
TURN OFF THE ALARM
When the Alarm activate, press the
ALM OFF/SOURCE
button to turn off the Alarm.
LISTENING TO THE NATURE SOUND
1.
Press the
ALM OFF/SOURCE
button to select the Nature Sound mode (“
n s
” ).
2.
Press
/HR
Button and
/MIN
button
to select the desired Nature Sounds. For example, “n01”
means the first Nature Sound, “n20” means the twentieth Sound and “n a” means all the nature sound.
1.Heartbeat
2. Foghorns
3.Wind chimes
4. Aviary
5. Brook
6. City
7. Oceanside
8. Fireside
9. Dockside
10. Rain
11. Rainforest
12. Roadside
13.Steam Train
14. Surf
15.Thunderstorm
16. Tide
17. White Noise
18. Summer Night
19. Northwoods
20. Everglades
LISTENING TO THE AM/FM RADIO
1.
Press the
ALM OFF/SOURCE
button to select the FM or AM radio.
2.
Press the
/MIN
button or
/HR
button step by step to tune to the desired radio stations.
3.
Press and hold the
/MIN
button or
/HR
buttons for approx. 1 second, it will start to search the next
radio station in the direction of the search. The search operation simply finds stations with strong
signals. Stations with weak reception can only be tuned in manually.
ANTENNA
For best reception, fully extend the FM wire antenna to receive FM stations. For AM reception, the unit has
a built-in antenna, turn the whole unit for best reception.
SAVING A RADIO STATION TO THE MEMORY
1.
Tune the radio to the desired station.
2.
Press and hold the
CLK/MEM
button for approx. 1 second, the LED display will show
P01
and flash,
the radio station will stored in the memory..
3.
Up to 10 AM and 10 FM radio stations can be stored in the memory.
TO LISTEN TO A SAVED RADIO STATION
1.
Press the
ALM OFF/SOURCE
button to select
FM
or
AM
radio.
2.
Press the
CLK/MEM
button to select the stored radio station.
SLEEP TO MUSIC FUNCTION
1.
This function allows you to listen to the radio while you fall asleep.
2.
Press the
SNOOZE/SLEEP
button, the display will show the default sleep time of 90 minutes
3.
Press the
SNOOZE/SLEEP
button again to adjust the desired sleep time.
4.
The options are 90-80-70-60-50-40-30-20-10-min. or OFF
5.
Now you can enjoy listening to the radio for the pre-set period of sleep time.
6.
After this pre-set time has elapsed, the unit will switch off automatically.
AUX IN CONNECTION
1.
Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out jack or
phones jack on your MP3 player or audio device and the other side to the aux-in jack on the unit.
2.
Press the
ALM OFF/SOURCE
button to select AUX mode, “
AUH
” will display in the LED display for a
few seconds.
3.
Turn on your MP3 player and follow the playback instruction.
4.
To stop this function, simply turned off your MP3 player.
-4-