SETTING THE CLOCK
1. When the unit is
OFF
, press and hold the
CLOCK
button for about 1 second, the ‘HOUR” digit will begin to
flash on the display.
2. Press the
TIME+
button or
TIME−
button to adjust the hour, when the correct hour is selected, press the
CLOCK
button again. The “MINUTE” minute digit will begin to flash.
3. Press the
TIME+
button or
TIME−
button to adjust the minute. When the correct minute is selected, press
the
CLOCK
button to confirm.
Note :
When
“A”
is show in the top left color of the display, indicate the time displayed is
AM
.
When
“P”
is show in the top left color of the display, indicate the time displayed is
PM
.
SETTING THE ALARMS
1. When the unit is OFF, press and hold the
ALARM
button for 1 second, the “ALARM ON” and the “HOUR”
digit of the alarm time will begin to flash on the display.
2. Press the
TIME+
button or T
IME−
button to adjust the alarm hour, when the desired alarm hour is selected,
press the
ALARM
button again. The alarm minute will begin to flash.
3. Press the
TIME+
button or
TIME−
button to adjust the alarm minute. When the desired alarm minute is
selected, press the
ALARM
button to confirm.
4. The alarm wake up source
“rA” (radio)
or
“bU” (buzzer)
will begin to flash. Use the
TIME+
or
TIME−
to
select the alarm wake up source, when selected, press the
ALARM
button to confirm.
Note :
Please make sure the ALARM ON with the alarm time is display on the display.
TURN OFF THE ALARM
Whenever the alarm activate, press the
ALARM
button to turn off the alarm. The display will then show
“ALARM OFF”.
SNOOZE FUNCTION
1. Whenever the alarm (radio or buzzer) activates, it can be temporarily suspended for a short period of 9
minutes by pressing the
SNOOZE/SLEEP
button once. (The “ALARM ON” in the display will keep flashing
during this 9 minutes SNOOZE period).
2. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE period has ended.
3. This procedure can be repeated for up to approximately one hour.
PROJECTION
1. Press the
PROJECTION ON/OFF
button to turn on the PROJECTION function.
2. The projector displays the time via a bright red projection light onto a wall, ceiling or any surface for
viewing in a darkened room.
3. Rotate the
PROJECTOR WHEEL
to point the Projector lens to the desired direction. The projector lens
can vertically swivel 180° so that you may view the TIME from different position. .
4. If the projected image is out of focus, use the
PROJECTION FOCUS knob
to adjust the image until the
projection is in focus.
5. Press the
PROJECTION ROTATE 180°FLIP
button to flip the projected image for
180°
.
6. To turn off the PROJECTION function, press the
PROJECTION ON/OFF
button again.
Notes
1. Do not stare into the lens directly.
2. The projector function cannot be used unless the clock has been set.
3. Certain walls and ceilings may not display the projection properly.
4. Don’t rotate the projector wheel beyond its limits, it may be damaged.
LISTENING TO THE FM RADIO
1. Press the
POWER
button to turn on the unit.
2. Press the
FUNCTION
button to select FM radio (current radio frequency will be shown on the display)
3. Press
VOL +
or
VOL –
Button for the desired volume level;
MANUAL STATION SELECTION
Press the
TUN+/SKIP+
button or
TUN-/SKIP-
button step by step to tune to the desired radio stations.
-3-
SEARCH STATION OPERATION
Press and hold the
TUN+/SKIP+
button or
TUN-/SKIP-
button for approx. 1 second, it will start to search the
next radio station in the direction of the search. The search operation simply finds stations with strong signals.
Stations with weak reception can only be tuned in manually.
ANTENNA
For best reception, fully extend the FM wire antenna to receive FM stations.
SAVING A RADIO STATION TO THE MEMORY
1. Tune the radio to the desired station.
2. Press and hold the
PRESET/PLAY
button for approx. 1 second, the display will show PXX and flashing,
where ‘XX’ is the next memory station number. Press the
TUN+/SKIP+
button or
TUN-/SKIP-
button to
select the memory station number.
3. Press the
PRESET/PLAY
button to store the radio station in the memory..
4. Repeat step 1 to 3 to store more radio stations in the memory.
5. Up to 10 FM radio stations can be stored in the memory.
TO LISTEN TO A SAVED RADIO STATION
Press the
PRESET/PLAY
button to select the stored radio station. Press the
PRESET/PLAY
button skip up to the
next memory station.
SLEEP TO MUSIC FUNCTION
1. This function allows you to listen to the radio while you fall asleep.
2. Press the
SNOOZE/SLEEP
button, the display will show the default sleep time of 90 minutes
3. Press the
SNOOZE/SLEEP
button again to adjust the desired sleep time.
4. The options are 90-80-70-60-50-40-30-20-10- 00(OFF)
5. Now you can enjoy listening to the radio for the pre-set period of sleep time.
6. After this pre-set time has elapsed, the unit will switch off automatically.
AUX IN CONNECTION
1. Press the
POWER
button to turn on the unit.
2. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out jack or
phones jack on your MP3 player or audio device and the other side to the aux-in jack on the unit.
3. Press the
FUNCTION
button to select
AUX
mode, “AUX” will display in the display.
4. Turn on your MP3 player and follow the playback instruction.
5. To stop this function, simply turned off your MP3 player or select other modes.
BLUETOOTH
OPERATION
Connecting BLUETOOTH
1.
Press the POWER button to turn on the unit.
2.
Press the
FUNCTION
button to select
BLUETOOTH
mode, ‘
bT
‘ will show and flash in the display.
3.
Turn on the Bluetooth of your device and search the unit for connection. Your Bluetooth device should find
“
HX-108CR HANNLOMAX
”. Select this for connection.
4.
If connection is successful, your Bluetooth device may show Bluetooth is connected. ‘ bT ‘ remain on in
the display.
5.
Select and play the audio file though your Bluetooth device.
6.
You can use the
TUN+/SKIP+
button to go to the next track or press the
TUN-/SKIP-
button to go back to
the previous track.
7.
Press the
PRESET/PLAY
button to temporarily pause playing. To resume, press the
PRESET/PLAY
button again.
8.
Press
VOL +
or
VOL –
Button for the desired volume level;
Turn Off the Bluetooth Operation
To turn off the BLUETOOTH operation, press the
FUNCTION
button or select other modes.
-4-
