SETTING THE CLOCK
1. When the unit is
CLOCK
mode, press and hold the
CLOCK/RESET
button for about 1 second, the time
will begin to flash on the LCD display.
2. Press the
TUN+/HOUR
button to adjust the hour.
3. Press the
TUN-/ MIN
button to adjust the minute.
4. When the correct time is selected, press the
CLOCK/RESET
button again to confirm.
SETTING THE ALARMS
1. When the unit is
CLOCK
mode, press the
ALARM
button.
The ALARM time will begin to flash on the LCD display.
2. Press the
TUN+/HOUR
button to adjust the alarm hour.
3. Press the
TUN-/ MIN
button to adjust the alarm minute.
4. When the correct time is selected, press the
ALARM
button to confirm.
5. Press the
ALARM
button to select the ALARM sound mode -
buzzer
or
currently set radio station
. The
alarm buzzer or FM radio indicator will light up.
SNOOZE FUNCTION
1. Whenever the alarm (radio or buzzer) activates, it can be temporarily
suspended for a short period of 9 minutes by pressing the
SNOOZE
button (on the top) once.
2. The buzzer or radio will then automatically activate again after the
9 minutes SNOOZE period has ended.
3. This procedure can be repeated for up to approximately one hour.
TURN OFF THE ALARM
When Alarm activate, press
ALARM
button repeatedly to turn off Alarm until Alarm indicator goes off.
LISTENING TO THE FM RADIO
Press the
STANDBY/MODE/AL RESET
button to select
FM radio
mode.
NOTE: For best reception, fully extend the FM wire antenna to receive FM stations.
AUTO TUNINING
1. Hold
SCAN
button. It will scan radio station and store the 20 strongest radio stations. Press
PRESET
button to select next stored radio station.
2. Press and hold the
TUN+/HOUR
or
TUN-/ MIN
button for. 1 second, it will start to search the next radio
station in the direction of the search. The search operation simply finds stations with strong signals. Stations
with weak reception can only be tuned in manually.
MANUAL TUNING
1. Press the
TUN+/HOUR
or
TUN-/ MIN
button step by step to tune to the desired radio stations.
SAVING A RADIO STATION TO THE MEMORY MANUALLY
1. Tune the radio to the desired station.
2. Press and hold the
CLOCK/PRESET
button to store this radio station in the next memory station number.
The display will show
PXX
(
XX
is the memory station number from 01 to 20)
3. Press the
TUN+/HOUR
or
TUN-/MIN
button to select the number of memory station number.
4. Press
CLOCK/PRESET
button
to confirm and save.
5. Up to 20 FM radio stations can be stored in the memory.
-3-
TO LISTEN TO A SAVED RADIO STATION
In radio mode, press the
CLOCK/RESET
button to select the next stored radio station.
BLUETOOTH
OPERATION
1. Press the
STANDBY/MODE/AL RESET
button to select
BLUETOOTH
mode
2.
‘bt’
start blinking continuously in the LCD display.
3.
Turn on the Bluetooth of your Bluetooth device and search the unit for connection. Your Bluetooth
device should find “
HX-106CR HANNLOMAX
” ( Enter ”0000” if password is required.)
4.
When the connection is successful, the Bluetooth logo will stop blinking.
5.
Select and play the audio file though your Bluetooth device.
6. Press
TUN+/HOUR
button to skip to the next track. Press
TUN-/ MIN
button to skip to the previous track.
7. Press
/PAIR
button to pause playing and press
/PAIR
button again to resume playing.
8. To turn off Bluetooth, press and hold the
STANDBY/MODE/AL RESET
button until display show “
OFF
”.
AUTO PAIRING
Once the unit paired with the Bluetooth device, it will automatically pair
with that device next time when you turn on the unit and that Bluetooth
device.
DISCOUNNECT PAIRING
Press and hold
/PAIR
button to disconnect all the Bluetooth paring.
Then, it will search for a new Bluetooth connection.
AUX IN CONNECTION
1. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out jack or
phones jack on your MP3 player or audio device and the other side to the aux-in jack on the unit.
2. Press the
STANDBY/MODE/AL RESET
button to select
AUX
mode,
3. Turn on your MP3 player and follow the playback instruction.
4. To stop this function, simply turned off your MP3 player or
switch other modes.
CHARGE YOUR DEVICES
Connect the standard size end of a USB cable (not included)
to the USB port at the back of unit and connect the other end
to the charging port of your device. The unit contains one
USB port with 5V ~ 1A charging.
Remarks:
Some devices may not support USB charging or
may require a higher power rating than this product provides. Observe the charging status on your device.
Ensure your device is working properly before attempting to charge. Charging function may not be supported
for all phones or electronic devices
SLEEP TO MUSIC FUNCTION
1. This function allows you to listen to the
Radio/Bluetooth/Aux-in
while you fall asleep.
2. Press the
SLEEP
button, display will show the default sleep time of 90
minutes
3. Press the
SLEEP
button again to adjust the desired sleep time.
4. The options are
90-80-70-60-50-40-30-20-10-min.
or
OFF
5. You can enjoy listening to the radio/music for the pre-set period of sleep time.
6. After this pre-set time has elapsed, the unit will switch off automatically.
-4-
