1
TUN.DN / MIN Button
11
ALARM1 RADIO Indicator
2
TUN.UP / HR Button
12
ALARM2 BUZZER Indicator
3
DIMMER Button
13
ALARM2 RADIO Indicator
4
AL2 / VOL
−
Button
14 LED
Display
5
AL1 / VOL
+
Button
15 Speaker
6
CLK / MEM Button
16
FM Wire Antenna
7
SLEEP / SNOOZE
Button 17
USB
Port
8
/ SOURCE / AL.OFF Button
18
AUX-IN Jack
9
PM Indicator
19
DC Jack
10
ALARM1 BUZZER Indicator
20
Battery Compartment
CONNECTING THE UNIT TO POWER
Plug one end of the AC adaptor into the DC power Input, and then plug the other end into AC
wall outlet. Before switching on the unit, make sure that the voltage of your electricity supply is
the same as that indicated on the rating plate.
BATTERY BACKUP
Insert two pieces UM-4 batteries into the battery compartment. Be sure to observe the proper
polarity (the "+" and "-" signs) as indicated inside the battery compartment.
In case of power failure or interrupted AC power, the current time and alarm time settings, the
stored radio stations are preserved in the memory of the unit by means of battery back-up
function.
SETTING THE CLOCK
1. With the unit in CLOCK mode (RADIO off), press and hold the CLOCK/MEM button for
about 1 second, the time will begin to flash on the LED display.
2. Press the TUN.UP/HR button to adjust the hour.
3. Press the TUN.DN/MIN button to adjust the minute.
4. When the correct time is selected, press the CLOCK/MEM button again to confirm.
SETTING THE ALARMS
1. With the unit in CLOCK mode (RADIO off), press and hold the AL1/VOL
+
or AL2/VOL
−
button. The ALARM time will begin to flash on the LED display.
2. Press the TUN.UP/HR button to adjust the alarm hour.
3. Press the TUN.DN/MIN button to adjust the alarm minute.
4. When the correct time is selected, press the AL1/VOL
+
or AL2/VOL
−
button to confirm.
5. Press
the
AL1/VOL
+
or AL2/VOL
−
to select the ALARM sound mode - buzzer or currently
set radio station. The alarm buzzer or radio indicator will light up.
SNOOZE FUNCTION
1. Whenever
the alarm (radio or buzzer) activates, it can be temporarily suspended for a short
period of 9 minutes by pressing the SNOOZE/SLEEP button once.
2. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE
period has ended.
3. This procedure can be repeated for up to approximately one hour.
TURN OFF THE ALARM
When the Alarm activate, press the
/SOURCE/AL.OFF button to turn off the Alarm.
LISTENING TO THE AM/FM RADIO
1. Press
the /SOURCE/AL.OFF button to select FM radio
2. Press the TUN.UP/HR or TUN.DN/MIN button step by step to tune to the desired radio
stations.
3. Press and hold the TUN.UP/HR or TUN.DN/MIN button for approx. 1 second, it will start to
search the next radio station in the direction of the search. The search operation simply
finds stations with strong signals. Stations with weak reception can only be tuned in
manually.
SAVING A RADIO STATION TO THE MEMORY
1. Tune the radio to the desired station.
2. Press and hold the CLK/MEM button for approx. 1 second, it will store this radio station in
the memory.
3. Up to 10 FM radio stations can be stored in the memory.
TO LISTEN TO A SAVED RADIO STATION
1. Press
the /SOURCE/AL.OFF button to select FM radio.
2. Press the CLK/MEM button to select the stored radio station.
SLEEP TO MUSIC FUNCTION
1. This function allows you to listen to the radio while you fall asleep.
2. Press the SNOOZE/SLEEP button, the display will show the default sleep time of 90
minutes
3. Press the SNOOZE/SLEEP button again to adjust the desired sleep time.
4. The options are 90-80-70-60-50-40-30-20-10-min. or OFF
5. Now you can enjoy listening to the radio for the pre-set period of sleep time.
6. After this pre-set time has elapsed, the unit will switch off automatically.
AUX IN CONNECTION
1. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the
line-out jack or phones jack on your MP3 player or audio device and the other side to the
aux-in jack on the unit.
2. Press
the /SOURCE/AL.OFF button to select AUX mode, AUX will display in the LED
display for a few seconds.
3. Turn on your MP3 player or audio device and follow the playback instruction.
4. To stop this function, simply turned off your MP3 player or audio player.
TURN OFF THE UNIT
While in RADIO or AUX mode, press and hold the
/SOURCE/AL.OFF button for approximate
1 second, the unit will turn off and back to the CLOCK mode.
CHARGE YOUR DEVICES
Connect the standard size end of a USB cable (not included) to the USB port on the unit and
connect the other end to the charging port your device.
Remarks:
Some devices may not support USB charging or may require a higher power rating
than this product provides. Observe the charging status on your device. Ensure your device is
working properly before attempting to charge. Charging function may not be supported for all
phones or electronic devices
SPECIFICATIONS
Frequency Range:
FM 87.5 – 108 MHz
Power Supply:
AC 120V ~ 60 Hz
Rated Output:
DC5V 2.1A
Back-Up Battery:
2 pc. UM4
Specifications are subject to change without prior notice.