Hanna Instruments IRIS HI801 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 48

Hanna Instruments IRIS HI801 Скачать руководство пользователя страница 21

21

SETUP

6.1.11. AUTO OFF

Option: OFF, 5, 10, 30 or 60 minutes

This option helps conserve power when the instrument is not being used. If there is
no interaction between the user and the instrument for the set amount of time, the
instrument will automatically turn off to preserve the battery.
If the auto off is set to

OFF

and the power adapter is removed, the meter will auto

off after 60 minutes unless the power adapter is reconnected.
Press the

EDIT

key to modify value.

Use the

or

key to select the desired value.

Press the

CFM

key to confirm the auto off or the

CLR

key to return to the setup menu

without saving.

6.1.12. FACTORY RESET

This option will reset the instrument to its factory settings.
Press the

CFM

key to perform the factory reset.

Press the

YES

key to continue or the

NO

key to return to the meter setup menu.

Note: Back up all data before you continue to prevent accidental data loss.

Once this process has been started, it cannot be interrupted or reversed.

The meter will restart when the factory restart is complete.

6.1.13. RESET CONFIGURATION

This option will reset all modifications made in the meter setup. All values will be
reset to default.
Press the

CFM

key to reset the configuration. Press the

YES

key to continue or the

NO

key to return to the meter setup menu.

6.2. SYSTEM CHECK

Use the

or

key to select system check, press the

to enter the

menu.
System check allows you to view information about the instrument and perform self
diagnostic tests.

6.1.10. CUVETTE DETECTION

Option: On or OFF

If this option is

ON

, automatic cuvette detection is enabled. If the wrong cuvette

is used an error message will be displayed.
If this option is

OFF

, the indicated cuvette must be used with the factory methods

to get a valid measurement.

«
...
19
20
21
22
23
...
»

Содержание IRIS HI801

















































Отзывы:

Нет отзывов