Hanna Instruments HI9811-51 Скачать руководство пользователя

Страница: 18 / 20

Arr

ANT

WARRANTY

HI9811-51

is warranted for two years against defects in workmanship

and materials when used for its intended purpose and maintained

according to instructions. Electrodes and probes are guaranteed for six

months. This warranty is limited to repair or replacement free of charge.

Damage due to accidents, misuse, tampering, or lack of prescribed

maintenance is not covered.

If service is required, contact your local Hanna Instruments

office.

If under warranty, report the model number, date of purchase, serial

number (engraved on the bottom of the meter), and the nature of the

problem. If the repair is not covered by the warranty, you will be notified

of the charges incurred. If the instrument is to be returned to Hanna

Instruments, first obtain a Returned Goods Authorization (RGA) number

from the Technical Service department and then send it with shipping

costs prepaid. When shipping any instrument, make sure it is properly

packed for complete protection.

MAN9811-51 01/22

Содержание HI9811-51





















Результаты поиска

Содержание HI9811-51

Отзывы:

Похожие инструкции для HI9811-51

Бренды по названию

Популярные бренды

Hanna Instruments HI9811-51, Инструкция по эксплуатации

Результаты поиска

Содержание HI9811-51

Отзывы:

Похожие инструкции для HI9811-51

Бренды по названию

Популярные бренды