13
mEAS
ur
Em
ENT
7.3. TEMPERATURE
• Immerse the tip of the probe 4 cm (1
1/2
”) into the sample.
• Press the
°C
(Temperature) key.
• Stir briefly and wait a few minutes for the measurement to stabilize.
Read value is displayed on the LCD.
Screens from DY9812V3 received from Mech.
7.4. WARNINGS
pH & EC / TDS
• If measured value is outside the parameter limit of the instrument,
the maximum or minimum value is displayed blinking.
• If a broken / wrong probe has been connected,
“— — —”
is displayed.
Temperature
• If the probe is not connected, or if a broken / wrong probe has been
connected,
“— — —”
is displayed.
