34
Alarm State
Three settings are available for the Alarm State option:
Disabled - the alarm will be disabled.
Inside Limits - the alarm state will trigger when the measured
value is inside the set limits.
Outside Limits - the alarm state will trigger when the measured
value is outside the set limits.
To set the Alarm State:
• Press
while in
Conductivity mode.
• Press
.
• Use
or
to select the
Alarm option.
• Press
and use
or
highlight the
Alarm State option.
• Press
and use
or
to highlight the desired option.
• Press
to confirm your selection or press
to cancel operation.
Alarm Limits
This option allows the user to set the alarm limits for the measured value.
Note
: The Alarm High value can not be lower than the Alarm Low value.
• Press
while in
Conductivity mode.
• Press
.
• Use
or
to select the
Alarm option.
• Press
and use
or
highlight the
Alarm
Limits option.
• Press
and then use
or
to set the
desired value, then press
to save the modified value or
press
to cancel operation.
• Press
return to the
Alarm options.
All manuals and user guides at all-guides.com