Instruction Manual
HI 99171
Portable Waterproof
Leather & Paper pH Meter
w w w . h a n n a i n s t . c o m
All Hanna Instruments meters are warranted
for two years against defects in workmanship
and materials when used for their intended pur-
pose and maintained according to instructions.
The probes are warranted for a period of
six months.
This warranty is limited to repair or replacement
free of charge. Damage due to accidents, misuse,
tampering or lack of prescribed maintenance are
not covered.
If service is required, contact the dealer from
whom you purchased the instrument. If under
warranty, report the model number, date of pur-
chase, serial number and the nature of the prob-
lem. If the repair is not covered by the warranty,
you will be notified of the charges incurred. If the
instrument is to be returned to Hanna Instruments,
first obtain a Returned Goods Authorization Num-
ber from the Customer Service department and
then send it with shipment costs prepaid. When
shipping any instrument, make sure it is properly
packaged for complete protection.
All rights are reserved. Reproduction in whole or in
part is prohibited without the written consent of the
copyright owner.
WARRANTY
PRELIMINARY EXAMINATION
Remove the instrument from the packing ma-
terial and examine it carefully to make sure
that no damage has occurred during ship-
ment. If noticeable damage is evident, notify
your dealer.
Note: Save all packing material until you
are sure that the instrument func-
tions correctly. All defective items
must be returned in the original pack-
ing together with the supplied ac-
cessories.
HI 99171 is a portable and waterproof pH
meter supplied with the HI 1414D probe,
specifically designed with a flat tip sensor
for direct pH measurement on surfaces,
such as leather and paper.
Moreover, a built-in temperature sensor al-
lows simultaneous pH and temperature
readings and a mini amplifier renders mea-
surements impervious to noise and electri-
cal interferences.
The meter is supplied in a rugged carrying
case, complete with:
•
HI 1414D pH/temperature probe
•
HI 70004 pH 4.01 buffer, 20 mL sachet
•
HI 70007 pH 7.01 buffer, 20 mL sachet
•
HI 700680 cleaning solution for cellulose
deposits, 20 mL sachet (2 pcs.)
•
HI 70960 sample preparation solution, 30
mL dropper bottle
•
batteries and instructions
GENERAL DESCRIPTION
SPECIFICATIONS
LCD DESCRIPTION
1. Automatic Temperature Compensation
indicator
2. Stability indicator
3. Battery percentage
4. pH calibration indicator
5. Low battery indicator
6. Selectable temperature unit
7. Secondary display
8. Primary display
9. Measuring unit for primary display
IST99171R1 05/05
HI 1414D
Combination amplified flat-tip
pH electrode with built-in tem-
perature sensor, DIN connec-
tor and 1 m (3.3') cable
HI 70004P
pH 4.01 buffer solution, 20 mL
sachet (25 pcs.)
HI 7004L
pH 4.01 buffer solution, 500 mL
bottle
HI 70006P
pH 6.86 buffer solution, 20 mL
sachet (25 pcs.)
HI 7006L
pH 6.86 buffer solution, 500 mL
bottle
HI 70007P
pH 7.01 buffer solution, 20 mL
sachet (25 pcs.)
HI 7007L
pH 7.01 buffer solution, 500 mL
bottle
HI 70300M
Storage solution, 230 mL bottle
HI 70300L
Storage solution, 500 mL bottle
HI 7061M
General purpose cleaning so-
lution, 230 mL bottle
HI 7061L
General purpose cleaning so-
lution, 500 mL bottle
HI 70632M
Cleaning & disinfection sol. for
blood products, 230 mL bottle
HI 70632L
Cleaning & disinfection sol. for
blood products, 500 mL bottle
HI 700680P
Cleaning sol. for cellulose de-
posits, 20 mL sachet (25 pcs.)
HI 70680M
Cleaning solution for cellulose
deposits, 230 mL bottle
HI 70680L
Cleaning solution for cellulose
deposits, 500 mL bottle
HI 70960
Electrolyte solution for sample
preparation, 30 mL bottle
HI 710007
Blue shockproof rubber boot
HI 710008
Orange shockproof rubber boot
HI 721312
Hard carrying case
ACCESSORIES
Range
-2.00 to 16.00 pH
-5.0 to 105.0°C / 23.0 to 221.0°F
Resolution
0.01 pH / 0.1°C / 0.1°F
Accuracy
±0.02 pH
(@20°C/68°F)
±0.5°C up to 60°C; ±1°C outside
±1°F up to 140°F; ±2°F outside
Typical EMC
±0.02 pH
Deviation
±0.2°C or ±0.4°F
Temp. Compensation
Automatic
pH Calibration
Automatic, 1 or 2 point
with 2 sets of standardized buffers
(4.01/7.01/10.01 or 4.01/6.86/9.18)
Probe
(included)
HI 1414D
amplified pH/temperature probe
Battery Type
3 x 1.5V AA / IEC LR6
Battery Life
Approx. 1500 hours
Auto-off
After 8 minutes of non-use
Environment
0 to 50°C; RH 100%
Dimensions150 x 80 x 36 mm (5.9 x 3.2 x 1.4”)
Weight
210 g (7.4 oz.)
Hanna Instruments reserves the right to
modify the design, construction and appear-
ance of its products without advance notice.
Dear Customer,
Thank you for choosing a Hanna Instruments
Product.
Please read this instruction manual carefully
before using the instrument.
If you need additional technical information,
do not hesitate to e-mail us at
[email protected]
This instrument is in compliance with the
directives.
