14
If probes are added to the remaining chan-
nels during the recording mode, the data from
the additional probes will not be printed. Data
from remaining channels can only be added if
the recording mode is exited and a new log
number is entered.
A blinking "CH" will appear
on the display next to the
channel numbers not being
utilized and/or recorded.
If more than one channel is being monitored,
the printer will automatically print the tem-
perature of all the connected channels.
When the meter is in record-
ing mode "LOG" is displayed
on the bottom left corner of
the LCD with the tempera-
ture value on the primary dis-
play.
If no keys are pressed, the meter goes to
standby mode to prolong the battery life.
Notes:
•
If the PRINT key is
pressed while still in re-
cording mode, a printout
is produced without affect-
ing the running number.
•
Once in recording mode, the printing inter-
val cannot be changed. Exit the recording
mode first (pressing the ON/OFF key) be-
fore setting the new interval.
TO STOP RECORDING
In order to quit the recording
mode, press the ON/OFF
key. This will generate a re-
cording exit status printout.
ON/OFF
CH
°C
LOG
CH
°C
LOG
