manualshive.com logo in svg

Hanna Instruments HI 904, Быстрый старт, Страница: 57 / 180

Поделиться
Скачать
Hanna Instruments HI 904 Скачать руководство пользователя страница 57

4-11

GENERAL OPTIONS

Configure the settings on the titrator 

Balance Configuration menu to match the settings for

your particular balance (baud rate, data bits, parity, stop bit number, request command
syntax). It may be necessary to change settings on your balance. Users should consult their
balance instruction manual.
Before leaving this screen, be sure the connection with the balance is working properly by

pressing the 

 key.

4.12

Printer mode

This screen allows the user to select the printing mode: ANSI (default), ASCII and Text
mode.

ANSI mode:

Use this mode when your printer is set to ANSI. In this case all accepted characters /
symbols available on the titrator will be printed by your printer.

ASCII mode:

Use this mode when your printer is set to ASCII. In this case only some of the
accented characters / symbols available on the titrator will print.

Text mode:

Use this when you don’t need to print the accented characters.

Содержание HI 904





















































































































































































Отзывы:

Нет отзывов