0
0.5
2
2.5
2
3
7
6
1
2
3
4
6
5
Res.
EC
EC
Resistivity
TEMPERATURE COEFFICIENT
EC Range
On/Off
199.9 µS/cm
1999 µS/cm
19.99 mS/cm
199.9 mS/cm
Resistivity:
19.90
/cm
HI 87314
Instruction Manual
HI 87314
EC/Resistivity Meter
w w w . h a n n a i n s t . c o m
Hanna Instruments reserves the right to modify the design,
construction and appearance of its products without advance notice.
All Hanna Instruments
meters are warranted for two years
against
defects in workmanship and materials when used for their intended
purpose and maintained according to instructions.
Electrodes and
probes are warranted for a period of six months.
This warranty is limited to repair or replacement free of charge.
Damages due to accident, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, contact the dealer from whom you purchased
the instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the failure. If the repair is
not covered by the warranty, you will be notified of the charges
incurred. If the instrument is to be returned to Hanna Instruments,
first obtain a Returned Goods Authorization Number from the
Customer Service department and then send it with shipment costs
prepaid. When shipping any instrument, make sure it is properly
packaged for complete protection.
Dear Customer,
Thank you for choosing a Hanna product. This manual will
provide you with the necessary information for the correct
operation of the meter. Please read it carefully before using the
meter. If you need additional technical information, do not
hesitate to e-mail us at [email protected].
Remove the instrument from the packing material and examine
it carefully to make sure that no damage has occurred during
shipment. If there is any damage, notify your Dealer.
The meter is supplied complete with:
•
HI 76302W
4-ring conductivity probe
•
HI 3316D
resistivity probe
•
HI 70030
calibration solution sachet
• 9 V battery (not rechargeable)
• calibration screwdriver and instructions.
Note:
Conserve all packing material until the instrument has
been observed to function correctly. Any defective item
must be returned in its original packing.
HI 87314
is a combination portable meter that can read conductivity
in 4 different ranges, and resistivity.
For conductivity measurements, the calibration is a simple 1 point
procedure through a trimmer located in the battery compartment, and
the supplied probe does not require recalibration when switching from
one range to another. The 4-stainless-steel-ring probe has a built-in
temperature sensor that automatically compensates for temperature
changes, and the temperature coefficient can be adjusted from 0 to
2.5% through a knob on the front panel.
For resistivity measurements, the meter is factory calibrated and, if
necessary, calibration can be adjusted by acting on the proper trimmer
located in the battery compartment. The
HI 3316D
resistivity probe is
easy to clean and requires little maintenance. It also features a built-in
temperature sensor to automatically compensate for temperature
variations, with an user-selectable (from 2 to 7%) coefficient.
Both probes use the same DIN plug on the top of the instrument, and
the meter automatically recognizes which probe is connected.
1) DIN connector for EC and resistivity probe
2) Liquid Crystal Display
3)
EC RANGE
key, to select the conductivity range
4) Resistivity temperature coefficient knob
5) Conductivity temperature coefficient knob
6)
ON/OFF
key, to turn the meter ON and OFF
A) Resistivity calibration trimmer
B) Conductivity calibration trimmer
C) 9 V battery
Range
199.9
µ
S/cm / 1999
µ
S/cm
19.99 mS/cm / 199.9 mS/cm
0 to 19.90 M
Ω
•cm
Resolution
0.1
µ
S/cm / 1
µ
S/cm / 0.01 mS/cm / 0.1 mS/cm
0.10 M
Ω
•cm
Accuracy (@20°C/68°F)
±1% FS for EC
±2% FS for resistivity
Calibration
Manual, 1 point, for both EC and resistivity
Temperature Compensation
Automatic from 0 to 50°C with ß selectable
from 0 to 2.5%/°C for EC and from 2 to 7%/°C for resistivity
Probes (included)
HI 76302W
for conductivity
HI 3316D
for resistivity
Battery Type
1 x 9V (also rechargeable)
Battery Life
Approx. 100 hours of use
Environment
0 to 50°C (32 to 122°F); RH max 100%
Dimensions
145 x 80 x 36 mm (5.7 x 3.1 x 1.4")
Weight
230 g (8.1 oz.)
FUNCTIONAL DESCRIPTION
SPECIFICATIONS
GENERAL DESCRIPTION
WARRANTY
PRELIMINARY EXAMINATION
EC
Res.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.