manualshive.com logo in svg

Hanna Instruments HI 83749, Инструкция по эксплуатации, Страница: 41 / 52

Поделиться
Скачать
Hanna Instruments HI 83749 Скачать руководство пользователя страница 41

41

41

SETUP

• Press the UP or DOWN keys to set the minutes value.

Note: 

To edit the hour again, after the minutes were edited, press READ

.

• Press LOG/CFM to save the new time. The new set time will be displayed. Alternatively, press CAL/

RCL to exit without saving the changes.

 

12.8.  SET INSTRUMENT ID

The instrument ID is a four digit number that can be edited by the user. The instrument ID is 
downloaded on the PC application, together with the logged data. By setting a different ID for each 
instrument it is possible to mix information from different turbidimeters into the same database.
• To set the instrument ID, press CAL/RCL when the “Set instrument ID” panel is displayed. The 

default instrument ID is 0000. The existing ID value and the CFM tag will start blinking.

 

• Press the UP or DOWN keys to set the new instrument ID. By pressing and holding the UP or DOWN 

keys, the changing speed will increase.

• Press LOG/CFM to save the change. The new instrument ID will be displayed. Alternatively, press 

CAL/RCL to exit without saving the changes.

 

Содержание HI 83749





















































Отзывы:

Нет отзывов