Hanna Instruments HI 4221 Скачать руководство пользователя страница 13

Страница: 13 / 76

When the

online

graph

is displayed:

• Use

and

to move the graph along X (Time) axis.

• Press

to access the zoom menu for Y axis. Use

for zooming Y (parameter) axis.

• Press

to return to the main menu.

When the

offline

graph

is displayed:

• Use the arrow keys to move the graph along X (Time) and Y (parameter) axes.
• Press

to access the zoom menu for X and Y axes. Use

, or

to switch between the active zooming axes. Press

to zoom the selected axis.

Note

: While in zoom graph menu the

key is not accessible.

• Press

to return to the main menu.

Log History

Accessing this option, last logged records will be displayed on the LCD. The log history list also contains the appropriate

mV values, the logged temperature, the temperature compensation source, as well as the records time stamp.

Note

: If no data were logged, the “Log History Empty” message will be displayed on the LCD.

To access the Log History displaying mode:
• Press

while in

Measure mode. The “Choose Display Configuration” message will be displayed in

the Reminder messages area.

• Press

. The instrument will display the log history regarding the selected

Measure mode.

Notes:

• When an alarm condition is active, all logged records will have an exclamation mark (!).
• If another

Measure mode is selected, the Log History will reset.

• If the temperature unit is changed, all logged temperature values will be automatically displayed

in the new temperature unit.

Содержание HI 4221













































































Результаты поиска

Содержание HI 4221

Отзывы:

Похожие инструкции для HI 4221

Бренды по названию

Популярные бренды

Hanna Instruments HI 4221, Инструкция по эксплуатации

Результаты поиска

Содержание HI 4221

Отзывы:

Похожие инструкции для HI 4221

Бренды по названию

Популярные бренды