2 1
maining channels can only be added if the
recording mode is exited and re-entered. A
blinking "CH" will appear on the display next
to the channel numbers not being utilized
and/or recorded.
After approximately 5 minutes the display will switch off but the
logging function remains active.
To reactivate the display press TEMP.
If you wish to restart printing press the ALT
and PAPER keys simultaneously again.
Notes:
• Once in the logging mode, the interval cannot be changed. Exit
the logging mode by pressing ALT and LOG and entering the
password before setting the new interval.
• If PRT is pressed while in logging mode, a
printout is produced without affecting the
running sample number.
CH
°C
LOG
TEMP
SAMPLE NUMBER
During logging it is possible to know the running sample number.
Press the LOG key twice and the display will show the number of
values that have been taken in the current log.
LOGGING MODE WITH PRINTING
This function is useful in a variety of applications from unsupervised
monitoring to satisfying regulatory requirements. In addition to the
printouts, the measurements are also stored into the memory.
Press the ALT and LOG key simultaneously to enter the logging mode.
ALT
LOG
+
LOG
PRT
LOG
2 x
LOG
ALT
LOG
+
