User's Manual of Fiber Laser Chiller
28
4.When using a forklift to move the equipment, make sure the equipment is stable and
<200mm above the ground, and make sure to avoid the equipment casters.
5.When using an overhead crane to move the equipment, use a wire rope to hold the
equipment in a stable position before moving.
11.2 Storage requirements
When the equipment is not used for a long time, please drain the coolant from the equipment
and use compressed air to drain the coolant from the pump, filter and pipeline, wipe off the water
and oil, pack the equipment with winding film to prevent dust and water, and place it in a cool and
ventilated place without direct sunlight and dust gathering.
Storage environment conditions, temperature: 0~60℃, relative humidity: ≤90%.
12. Other instructions
12.1 Service support
12.1.1 Warranty coverage
Within 24 months from the date of purchase of the product from our company, the
failure obviously caused by the design defect or quality problems arising from manufacturing, the
company provides free repair and replacement parts.
The warranty period expires, lifetime paid maintenance.
12.1.2 Non-warranty range of cases
Not in accordance with the instructions for installation, use and maintenance or use of
power and other external conditions do not meet the requirements
Damage caused by the external conditions such as power supply does not meet the
requirements.
Damage not caused by our company's poor transportation and storage.
Damage caused by the modification of our products or other human factors.
Damage caused by human force majeure factors. For example: natural disasters, war, etc.
Damage caused by installation on vehicles and ships or use abroad.
Damage caused by equipment failure.
12.2 Other matters
The power supply should be installed according to the national wiring standard
specification (voltage, frequency, and differential pressure should be met)
If the power cord is damaged, to avoid danger, it must be replaced by the manufacturer's
maintenance department, or professional personnel in similar department to replace.
The power must be turned off for 3 minutes before repairing.