ecurity enabled Z-Wave controller is needed.
Removing
1) Open the cover.
2) Place the device within the direct range of your Z-Wave controller.
3) Set the main controller remove mode (see the controller’s manual).
4) Triple click the Z-button quickly, the LED indicator should blink fast in orange.
5) Wait for the removing process to end.
6) Successful Removing will be confirmed by the Z-Wave controller’s message.
Ⅳ
.
Functions of each trigger
Function of Action Button:
FLOOD SENSOR is not in the Z-Wave network:
Trigger
Description
Short press 1 time or
short press 3
time(within 1
second)
Entering Learn function,led will blink blue fast. The blue light go on for
3 seconds indicate including success and enter wake-up state,then
send Wake up notification CC. When received the "Wake up no more
information CC", the product will be out of wake-up state and sleep.
FLOOD SENSOR is in the Z-Wave network:
Trigger
Description
Short
press
one
time
(within 1 second)
wake up product,blue light go on for 1 second.
Short press 3 time
(within 1 second)
Entering Learn function,led will blink yellow fast.if successful removing
from network ,the led will blink yellow slow three times.
Press and hold for
1-3 seconds
Led keep on cyan when holding the Z-Button, turn off when Z-Button is
released.
Press and hold for
3-10 seconds
LED keep on green.FLOOD SENSOR will send “wake up notification
command” to the nodes which is assigned by “Wake Up
Command”.When received the "Wake up no more information CC",exit
the wake up state and sleep.
Press and hold for
10-20 seconds
LED will blink orange fast
Press and hold more
than 20 seconds
LED keep on orange ,FLOOD SENSOR will send “Device_Reset_Locally”
to the main controller and exclude from the Z-Wave network when the
