Hanil Smart 15 Plus Скачать руководство пользователя страница 12

Страница: 12 / 23

②

Press Start/Stop( ) key.

4.6 Setting RPM/RCF

4. Operation

①

Press the Setup/Enter( )key to activate the RPM display

②

Press Left ( ) or Right ( ) key to move the cursor to rpm or rcf mode

③

Press Up ( ) or Down (

) key to input the setting value.

④

Press the Setup/Enter ( ) key to save the settings.

4.7 Setting run time

①

Press the Setup/Enter( )key.

②

Press Left ( ) or Right ( ) key to move the cursor to Time setting mode.

②

Press Left ( ) or Right ( ) key to move the cursor to Accel/Decel mode.

③

Press Up ( ) or Down (

) key to set the value.

④

Press the Setup/Enter ( ) key to save the settings.

4.8 Setting Accelation/Deceleration rate.

①

Press the Setup/Enter( )key.

▶

Accel/Decel step is 0 ~ 5.

▶

Step 1 is the slowest and step 5 is the fastest.

▶

Decel step ‘0’ means natural brake.

4.9 Starting the centrifugation run

①

Check the all parameters are correct and the lid is closed.

4.10 End the centrifugation

•

Press Start/Stop( ) key to abort centrifugation.

▶

The centrifuge stops automatically when the set time is reached.

③

Press Up ( ) or Down ( ) key to set the value.

④

Press the Setup/Enter ( ) key to save the settings.

▶

Accel mode: ACC display flashes

▶

Decel mode: ACC display flashes

[email protected]

│ 11

Содержание Smart 15 Plus























Результаты поиска

Содержание Smart 15 Plus

Отзывы:

Похожие инструкции для Smart 15 Plus

Бренды по названию

Популярные бренды

Hanil Smart 15 Plus, Руководство по эксплуатации

Результаты поиска

Содержание Smart 15 Plus

Отзывы:

Похожие инструкции для Smart 15 Plus

Бренды по названию

Популярные бренды