Hanil J1250, Руководство по эксплуатации

Страница: 28 / 30

10.
Trouble Shootings
1) Bearing pulley
The adjustment of the location of the belt for the bearing pulley depends on the location
(up and down) of the tension pulley.
2) Motor pulley
The adjustment of the location of the belt for the motor pulley depends on the location
of the idler elbow (left and right).
3) The adjustment of distortion on the belt
a. The adjustment of distortion depends on the horizontal angle of the tension pulley.
The contact surface between the belt and the tension pulley suppose to be in center. The belts
can be easily unlaced by failure on this adjustment.
* The angle adjustments suppose to be done by several trials.
* The belt is supposed to be in the center and escape getting entangled in the pulley.
25
ㅣ
info@ihanil.com / techsupport@ihanil.com