Hanil Fleta 5, Руководство по эксплуатации

Страница: 15 / 22

③
Press the Enter ( ) button in stand-by mode.
4. Operation
4.7 Acc/Dec setting
①
Press the Enter ( ) button in stand-by mode.
②
Turn the Mode ( ) button to move the cursor to ‘ACC’ or ‘DEC’.
③
Turn the Enter ( ) button to the left or right to input the value.
④
Press the Enter ( ) button to finish setting.
▶
0~9 Steps, 0 step is the lowest step, 9 step is the fastest step.
▶
Recommend accel/decal 5 step.
4.8 Radius input
①
When the lid is closed, the rotor is recognized automatically.
②
After recognizing the rotor, the radius is automatically set.
④
Turn the Enter ( ) button to the left or right to input the value.
⑤
Press the Enter ( ) button to finish setting.
4.9 Start the centrifugation run
4.10 End the centrifugation
①
Check the all parameters are correct and the lid is closed.
②
Press Start ( ) button.
①
Press Stop( ) button to abort centrifugation.
14 www.ihanil.com