Hangzhou Ruideng Technologies Co., Ltd
3
2.4A/2.1A/ 1A/0.5A
、
Android DCP
、
SAMSUNG.
(
Note
:
This quick charge agreement recognition model is
for reference only, because cell phone updated quickly, it can't be absolutely accurate identification
）
Parameter Setting:
At any interface of 2 interfaces, Press and hold the button to realize data set. Long press the
button more than 0.5s, the corresponding icon will be selected and displayed (the background of
icon turns black to blue), then step through the options of screen off, temperature display units,
data group switch, data group clear zero and screen rotation. Stop on the function you wish to set
then loosen the button
Press and hold the button, the
corresponding
icon will be selected and displayed, then
loosen the button, screen will be off, then press the button or power on again, the display will
light again
. Press and hold the button, the
corresponding
icon will be selected and displayed, then
loosen the button, the temperature unit will be switched. Degree centigrade is the default
temperature unit
Press and hold the button, the
corresponding
icon will be selected and displayed, then
loosen the button, data group will be switched. This tester can provide 2 groups to store and
check, 0 and 1 data group.
When the data set is 0 group, the current capacity will be stored
after power off. When power on next time, the stored mAh and mWh is blinking displayed.
When the new mAh is up to 1 mAh, the stored mAh and mWh will be covered, and the values
will start over.
When data set is group 1, the current capacity will be stored after power off. And
the stored capacity will be accumulated after power on.
Press and hold the button, the
corresponding
icon will be selected and displayed, then
loosen the button, the data of
the current data group will be zero.
Press and hold the button, the
corresponding
icon will be selected and displayed, then
loosen the button, the screen will be rotated 180 degree, and stored automatically, which
is
convenient for
later
using
