31
Rear wheel
1) Place lifts truck on level concrete.
2) Pull the parking brake lever and
place chocks before front wheels to
prevent movement of forklift.
3) Put the lifting jack under the
counterweight.
Caution:
Make sure the jack capacity is bigger
than 2/3 of service weight of forklift.
4) Loosen wheel nuts 1-2 turns each by
turning them counter-clockwise.
△
!
Warning!
Do not move wheel nuts until rear
tires are raised from ground.
5) Raised the forklift by swing the rod of
jack until it out of ground. Support forklift
truck by putting additional wooden blocks
under each side of the front-end frame as
shown below.
6) Take out the wheel nut of rear wheel,
and then replace the wheel.
△
!
Warning!
a. When removing tire from wheel rim,
do not remove rim set bots and nuts
before releasing air.
b. Make sure that wooden blocks used to
support lift truck are solid, one-piece
units.
c. Never get under forklift while it is
supported only by wooden blocks.
7) Retighten the nut on consequence as
figure show below:
8) Remove the wooden block under
chassis body. Let down the forklift slowly.
Then take away the chocks before the
front wheel.
9) Retighten the wheel nut with right
tightens torque.
10) Inflation tyre again to right air
pressure.
