HANGCHA CBD20-AMC1 Скачать руководство пользователя страница 48

Страница: 48 / 71

10 Relevant safety directive or standard (CE)

After CE certificated, the truck meets the following directive and standard:

–

2006/42/EC machinery directive

namely

Directive of the council of the laws of the member

states concerning machinery

, 2000/14/EC Noise Directive Namely

Directive of the council

of the laws of the member states concerning noise radiation of outdoor equipment

;

–

EN ISO3691-1:2012

Industrial trucks -- Safety requirements and verification -- Part 1:

Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and

burden-carrier trucks

EN16307-1:2013

Industrial trucks. Safety requirements and

verification. Supplementary requirements for self-propelled industrial trucks,other than

driverless trucks,variable-reach trucks and burden-carrier trucks

–

EN1175-1:1998+A1:2010

Safety of industrial trucks - Electrical requirements - Part 1:

General requirements for battery powered trucks

EN1726-1:1998

Safety standard for

machinery industrial vehicle

, EN12053:2001, EN1175-1:1998, EN13059:2002, EN1757-2

2001 harmonized standard;

–

Main safety elements are in accordance with 2006/42/EC machinery directive as well as

EN1175-1:1998+A1:2010, EN1726-1:1998,EN1757-2

2001 standard;

Electronic components design and manufacture meet low-voltage apparatus directive

2006/95/EC;

Noise is calculated according to EN12053:2001+A1:2008: pallet truck noise, sound pressure

value.

Lifting: right ear 65.8dB, left ear 65.1dB

Driving: right ear 68.5dB, left ear 68.4dB

–

Vibration data are calculated according to the EN13059:2002+A1:2008

Safety of industrial

trucks - Test methods for measuring vibration

,ISO5349-2:2001 and ISO2631-1:1997

standard, meet 2002/44/EC directive: handle vibration amplitude is 0.0558m/s

–

Electromagnetic compatibility is calculated according to EN12895:2000 and meet

2004/108/EC directive.

Содержание CBD20-AMC1








































































Результаты поиска

Содержание CBD20-AMC1

Отзывы:

Бренды по названию

Популярные бренды

HANGCHA CBD20-AMC1, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание CBD20-AMC1

Отзывы:

Бренды по названию

Популярные бренды