HANGCHA CBD20-AC1S, Руководство по эксплуатации и обслуживанию, Страница: 23 / 117

19
poles of the battery to avoid spark or short
circuit.
10) The work ground of forklift shall be solid
and smooth concrete surface or similar
ones. Pre-check the ground condition of
working site. Tidy the working site, clean
obstacle, sweep macadam, muddy sand
and wipe off greasy dirt.
11) Do not overload. Before operation, first
know the curve chart on the load curve
plate well, which indicates the relation
between rated load and load center.
12) Before start, press the horn and make
sure no people around.
13) Goods are not allowed to deviate the fork
center, when goods is deviating the fork
center, turn or pass uneven road, you are
easily to fall. Meanwhile, possibility of
turnover will increase.
14) Avoid sudden drive, stop or turn.
15) Do not drive the truck when the forks in
high position.
16) When handling bulky loads, which restrict
your vision, please operate the machine in
reverse or have a guide.
17) Cause the wheels of pallet truck is small,
it is not allowed to run on the street, and
only for driving in specified stacking place.
18)
or body under the forks. Never stand on
the fork.
19)
or body into the space between the
chassis and lifting component, once
forbidden to put the head, hand, foot or
body into the space between fork and link
mechanism. Crushing and shearing
hazards for the operator of
pedestrian-controlled trucks featuring
foldable platforms and reach trucks,
between parts of the environment and the
truck during travelling forward
20) Make the loads in front when climbing the
working on the slope.
21) Do not use truck under the weather of
sand, snow, thunder, storm, typhoon, etc.
Avoid using the truck when the wind
speed is larger than 5m/s.
The weather condition: temperature:
WARNING
WARNING