19
Other Products To Consider - CAM220 Dome Camera
Find out more at www.nitedevil.com
Zoom Adjustment
Unlocking this screw allows you to adjust the
zoom in and out of the camera.
1
Focus Adjustment
Unlocking this screw allows
you to re-adjust the focus of
the camera after adjusting
the zoom.
2
Video Out - Main
Connect your co-ax to this
for the main Video output.
7
Video Out - Spare
Spare video out for local
test using a test monitor.
8
Joystick
Press down to bring up the OSD then navigate
using the joystick. Down again is select.
9
Conduit Entry
20mm blank supplied.
(Cable entry also at rear through a grommet)
10
Connection Block
Spring lock connections to wire up
the camera.
6
Left-Right Axis
Unlock these screws to adjust the
left-right orientation of the camera.
(2 Screws, 1 either side)
5
Rotational Axis
Turn this to rotate the cameras output
image so that it is correct on a monitor.
(Loosen tilt screws first)
4
Tilt Axis
Unlock this screw and one on the other
side to tilt the camera up and down.
3
