Actilino
Error Messages
Page 108
Note:
If this warning appears, it is advisable to back up the files stored on your
Actilino.
"FsVersion x.y, ERR: n: t."
Cause:
This message appears following any error message relating to the file sys-
tem. It provides information regarding the current version of the file system
(x.y), the number of the error (n) and an error description (t).
"Formatting, please wait!!!"
Cause:
This message appears while the storage medium is being reformatted
subsequent to a fatal error detected by the file system test.
Note:
When formatting has finished, you must reload the contents of the folder
“HTSYS”. All saved files will have been deleted.
"WRN: KBD layout not found. Using standard layout."
Cause:
During the Actilino's start up procedure no valid keyboard layout table was
found for the selected language.
Result:
The default internal German table will be used.
Remedy:
Download a valid keyboard layout table for the selected language.
13.2 Error Messages from the Message File
The messages listed below come from the reloadable message file. They include messages
of a general nature, system messages and Editor messages.
13.2.1 General Messages
"Please wait!!!"
Cause:
This message appears while the system is executing a task requiring some
time. For example, this would be the case while the system is generating the
file list.
"Cannot execute this function"
Cause:
A function cannot be executed.
"Deactivating function keys!"
Cause:
A reminder that function keys have been deactivated. After turning the unit
off and back on, the function keys will again be active.
13.2.2 File System Messages
"No files stored on disk!"
Cause:
There are no files stored on the storage media.
"Error creating braille character set file"
Cause:
There is not enough memory in the file system to generate the Braille
character sets.
"New braille set file created! Please reload needed sets!"
Cause:
The Braille character set file was recreated, because it was either missing or
its size was incorrect. You will have to reload the required character sets into
the Actilino.
"Braille set n is empty"
Cause:
You are attempting to activate a Braille character set numbered x, but that
character set slot is empty.
"Error writing configuration file"
Cause:
An error occurred while saving the configuration.
"Saving configuration, please wait!"
