Troubleshooting
If the following problems occur, please perform checks to see if problem is fixed.
Error
Check
Action
No air blows
even if hands
are inserted.
Do the display indicators lights
up?
Is the power switch on?
Are you putting your hands all the
way in?
Turn the ground-fault circuit breaker on.
Turn the power switch on
Put hands all the way in
The unit does
not stop
blowing.
Is the sensor blocked by the dirt
or dust?
Turn the power switch off, and then, after
all the lamps in the display have gone off,
remove the dust matter.
No hot air
comes out.
Is the heater turned on, is the
heater sensor dirty?
Turn the power switch off, check all the
indicators in the display area have gone
off (around 40 seconds) then turn on the
power switch again.
If the above actions do not work, turn off the power and the ground -fault circuit breaker, and call
your dealer to inspect and repair it if necessary.
Содержание Gorillo
Страница 1: ...Gorillo Hand Dryer User Manual...
Страница 6: ......
Страница 7: ......
Страница 8: ......