manualshive.com logo in svg

H&S HDII RAKE, Руководство оператора и список запасных частей

Поделиться
Скачать
H&S HDII RAKE Скачать руководство пользователя страница 5

Explain to the customer that the pre-delivery inspection was made.
Explain to the customer all the safety precautions they must excercise when
operating this unit.
Explain raking and windrow width adjustments.
Explain to customer that regular lubrication is required for proper operation and
long life of machine. Show customer the lubrication section of Owner’s Manual.
Give the customer Owner’s Manual and make sure they read and understand all
operating and service instructions.
Record Serial Number on page 18 of this Manual.
Have customer sign a completed “Warranty Registration,” and mail it promptly.

All grease fittings have been lubricated
 (See lubrication guide in this manual).
All mechanisms are operating trouble free.
Rake wheels touch ground in unison when lowered into position.
(Rake setting level)
All bolts and fasteners are tight.
All decals are in place and legible.
Control Box with mount accompanies rake.

AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS

H & S DEALER PRE-DELIVERY CHECK LIST

After the HDII Rake has been completely set-up, check to be certain it is in correct operating order before
delivering to the customer. The following is a list of points to inspect. Check off each item as you have
made the proper adjustments and found the item operating satisfactorily.

DEALER DELIVERY CHECK LIST

!

!

!
!

!

!

!

!

!

!

-3-

Note: Warranty is not valid until warranty card is completed and returned to H & S  Mfg. Co., Inc.

!

!

!

(Dealer’s Name)

(Signature of Pre-Delivery Inspector)

Serial Number

Model Number

 

 (Inspection Date)

(Date Delivered)

(Dealer’s Name)

(By)

 (Signature of Original Buyer)

This check list that follows is an important reminder of valuable information that should be
passed on to the customer at the time this HDII

 

Rake is delivered.

Check off each item as you explain it to the customer.

This delivery check list, when properly filled out and signed assures the customer that the
Pre-delivery service was satisfactorily performed.

Содержание HDII RAKE



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды