H&S H D TWIN AUGER, Руководство оператора / Каталог запасных частей

Страница: 36 / 54

- 34 -
FIGURE 3
Use the following steps when entering forage box
when NOT planning to run cross conveyor.
1. Shut off tractor.
2. Disconnect PTO from tractor and place in PTO
hanger.
** Disengage tractor hydraulics and disconnect
quick couplers at tractor.
3. Place control lever in beater engage position.
This will prevent beaters from turning while
climbing over them.
4. USE EXTREME CAUTION WHEN CLIMBING
OVER BEATERS AS TINES ON BEATERS MAY
CAUSE SEVERE INJURY.
If you plan to manually unload forage box utilizing cross conveyor, the following two-
man procedure must be followed. NEVER ATTEMPT THIS PROCEDURE ALONE. PERSON
OUTSIDE OF FORAGE BOX OPERATING CONTROLS MUST NOT LEAVE CONTROLS.
1. Place control lever in beater disengage position.
2. Disengage tractor PTO and shut off tractor.
** Disengage tractor hydraulics and shut off tractor.
3. Remove variable speed drive belt. This will prevent main aprons from moving.
4. Remove connector link from beater drive roller chain and remove chain from sprockets.
CAUTION: BEATERS ARE NOW FREE TO ROTATE.
5. Using a short piece of chain with hooks, secure top beater beater to center beater as illustrated
below.
Wrap chain around bottom bar of third beater
and top bar of second beater. Secure chain
together as tight as possible to eliminate beat-
ers from rotating in either direction. Keep excess
chain out of cross conveyor chamber. NOTE:
Hook chain properly and securely to prevent
unhooking during this procedure.
6. Using extreme caution, first person may now climb over beaters.
7. When first person is clear of beaters, second person may start tractor and engage PTO to operate cross
conveyor.
8. Before first person attempts to leave forage box, second person must disengage tractor PTO and shut
off tractor.
** Before first person attempts to leave forage box, second person must disengage tractor hydraulics and
shut off tractor.
9. When forage box is clear of people, remove safety chain from beaters, reinstall drive belt and beater
drive chain. Adjust tightener on roller chain.
** Denotes forage box equipped with optional hydraulic drive unit.
-19-