H&S 5234, Руководство оператора

Страница: 35 / 46

-33-
LUBRICATION
DRIVE CHAINS
The drive chains are lubricated by a automatic chain oiler using 10W-30 oil. Any time that the discharge
door is raised, a specified amount of oil is sent to the brushes on each of the chains. The oiler is adjust -
able to set the amount that is being discharged. This will extend the life of the drive chains. Keeping the
chains aligned with sprockets will also lengthen the life of the sprockets and drive chains.
The discharge gate control
cylinder shaft, discharge door
deflector shield cylinder shaft
and both front and rear main
auger cylinders should also be
frequently coated with a rust
preventative spray or lubricate
since the cylinder shaft may
remain extended when not
being used for a period of time.
CYLINDERS
The oiler reservoir is
located on the left front
side by the scraper
holder and jack storage
position.
Oiler brushes on
all chains.