H&S 5134 Скачать руководство пользователя страница 5

Страница: 5 / 72

Top Shot

was not damaged in shipment. Check for dents and loose or missing parts. Report

damage immediately to H&S Manufacturing Co., Inc.

All bolts and fasteners are tight.

Top Shot

has been correctly assembled according to instructions in this manual. Wheel nuts

and all other fasteners are tightly secured.

All grease fittings have been lubricated. Gearbox is filled to proper level.
See Lubrication Chapter of this manual for details.

Hoses and fittings are properly attached and there are no visible leaks.

Guards and shields are secure.

Wheels are properly mounted.

Tires are inflated to correct pressure.

Chains tension is properly adjusted. See Adjustment Chapter of this manual.

Decals are in place and legible.

H&S DEALER PRE-DELIVERY CHECK LIST

AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS

After the

Top Shot

has been completely set-up, check to be certain it is in correct operating order before

delivering to the customer. The following is a list of points to inspect. Check off each item as you have
made the proper adjustments and found the item operating satisfactorily.

Connect the

Top Shot

onto a proper horsepower 1000 RPM tractor and attach the PTO.

Connect the lights. Run the

Top Shot

and make sure all components operate properly.

PTO guard turns freely.

Discharge door operates smoothly.

Main Auger operates up and down smoothly.

Hydraulic system does not leak under pressure.

Lights and wiring functioning properly.

Electronic Scale (if provided) operates properly.

Implement and all components are functioning properly.

-3-

(Remove Dealer File Copy

At Perforation)

Содержание 5134









































































Результаты поиска

Содержание 5134

Отзывы:

Бренды по названию

Популярные бренды

H&S 5134, Руководство оператора и список запасных частей

Результаты поиска

Содержание 5134

Отзывы:

Бренды по названию

Популярные бренды